Hawthorn drying process<\/h3><\/div><\/div><\/div>\n<\/div><\/div><\/main><\/div><\/div>\nProcessing steps of hawthorn<\/h3><\/div><\/div><\/div>
\n1\u3001Firstly, wash and slice the hawthorn with a thickness of about 2 cm. It is best to use a slicer to complete it. This can effectively ensure that the thickness of the hawthorn is uniform, and it can also ensure the hawthorn could be heated evenly during the drying process, which is conducive to cyclic dehumidification.<\/p>\n
2\u3001For color protection treatment, in general, the hawthorn should be soak in 0.5% isovitamin C solution for 10-15 minutes to prevent the fruit pieces from discoloring. Afterwards, drain the water as soon as possible, and evenly put them into the material car layer by layer. Note that the thickness of the layer should not be too thick.<\/p>\n<\/div><\/section><\/p><\/div>
Processing steps of hawthorn<\/h3><\/div><\/div><\/div>
\n1\u3001Firstly, wash and slice the hawthorn with a thickness of about 2 cm. It is best to use a slicer to complete it. This can effectively ensure that the thickness of the hawthorn is uniform, and it can also ensure the hawthorn could be heated evenly during the drying process, which is conducive to cyclic dehumidification.<\/p>\n
2\u3001For color protection treatment, in general, the hawthorn should be soak in 0.5% isovitamin C solution for 10-15 minutes to prevent the fruit pieces from discoloring. Afterwards, drain the water as soon as possible, and evenly put them into the material car layer by layer. Note that the thickness of the layer should not be too thick.<\/p>\n<\/div><\/section><\/p><\/div>
\n
1\u3001Firstly, wash and slice the hawthorn with a thickness of about 2 cm. It is best to use a slicer to complete it. This can effectively ensure that the thickness of the hawthorn is uniform, and it can also ensure the hawthorn could be heated evenly during the drying process, which is conducive to cyclic dehumidification.<\/p>\n
2\u3001For color protection treatment, in general, the hawthorn should be soak in 0.5% isovitamin C solution for 10-15 minutes to prevent the fruit pieces from discoloring. Afterwards, drain the water as soon as possible, and evenly put them into the material car layer by layer. Note that the thickness of the layer should not be too thick.<\/p>\n<\/div><\/section><\/p><\/div>