Do the best products
Build for you
It uses a small amount of electricity to absorb a large amount of heat from the air. Compared with electric-heating dryer, it can save a lot of energy. Compared with oil, coal, and natural gas drying equipment, it can save a lot of operating costs. Shuntec is specialized in creating energy-saving solutions for drying Cannabis products and strive for making your products have more advantages.
Schematic diagram of the working principle of integral air heat pump drying machine
1.Integrated machinewith lateralair supply : it controls the start and stop bottom of the drying room, and controls the temperature, humidity and dehumidification time of the drying room. It also provides heat energy for drying materials.
2.Warehouse with polyurethane sandwich board: it provides heat preservation for materialsin the drying room.
3.Fan wall: it provides wind energy for the materials to bring out the moisture in the materials, and it can bring out the heat energy in the mainframeto make the drying room heat up or cool down.
4.Air guidingwall: it guides the wind of the fan wall to the front end, so that the air volume before and after the drying room is consistent, which achieves the purpose of uniform drying.
Material racks / carts
Polyurethane foam insulation drying room
Use 100mm thick polyurethane, color steel plate or stainless steel plate inside and outside, and use 100mm thick polyurethane foam insulation at the bottom of the drying room
Machine Technical Parameters
|Product Type||Integral air source heat pump dryer|
|Operating temperature range||℃||-10~43||-10~43||-10~43||0~43|
|Drying temperature range||℃||30~75||30~75||30~75||30~75|
|Rated heating capacity||KW||9.5||15.5||22||45|
|Operating electricity current||A||5.2||9||11.2||23.8|
|Compressor Type||/||High temperature, enthalpy increase, and fully-enclosed vortex type|
|Temperature control accuracy of drying room||℃||±1||±1||±1||±1|
|Number of compressors||台||1||1||1||2|
|Total power of exhaust fan||kW||0.25||0.25||0.25||0.25|
|Fresh air volume||m³/h||2000||2000||2000||2000|
|Electric heating power||KW||6||12||6||12|
1.Closed-cycle drying under normal atmospheric pressure and low temperature air, and the drying quality is good
2.The heat recovery and dehumidification system has been installed to improve the utilization rate of heat recovery, while ensuring that the temperature drops slowlyduring thedrying and dehumidification period. The drying quality requirements are met, and the overall energy saving effect is as high as 75%;
3.The performance of the unit is stable and reliable, and the drying quality is excellent
4.Energy saving and environmental protection, the integrated machine is easy to install, suitable for configuration and transformation of most of the new drying rooms
5.Large air volume and high static pressure design, flexible design of the air path; high energy efficiency; low noise and long service life
6.Highly intelligent technologyfor temperature and humidity control, preciselycontrols the temperature and humidity of the drying room.
Shuntec’s most popular custom dryer machines