1. the selected soybeans should be soaked in water at temperature of 40 degrees for 12 hours for peeling. After this process, the soybeans fully absorb water, and the original weight will increase by about 70%. The dried soybeans require a weight loss of 50% after the drying process, which means the weight of the dried soybeans will be 70%-80% of the original soybeans.

2.Put the foamed and peeled soybeans in the material cart and push them into the drying room. Afterwards, open the host panel and set the drying parameters. After completion, click the start button and then the equipment will run automatically.

3.The air-energy soybean dryer is an intelligent device. It runs automatically throughout the whole process and does not need to be guarded by personnel. After the drying process has been completed, it will automatically stop. It generally takes 6 hours to dry 250kg soybeans at a time.