Requirements for drying process steps of hippocampus dryer

Processing steps of hippocampus

Put the hippocampus in fresh water, wash it clean, after soaking for a period of time, wash away the gray-black skin on the body surface, cut open the abdomen to remove the internal organs, roll up the tail plate, spread the treated hippocampus on the material grid plate, insert the material Push the trolley compartment, push the material trolley filled with fresh seahorses into the drying room, and close the sealing door of the drying room.

Requirements for drying process steps of hippocampus dryer

Seahorse drying process

The 3P heat pump dehumidification integrated host is selected, and a polyurethane thermal insulation drying room with a length of 3.5 meters, a width of 2.2 meters and a height of 2.2 meters is configured. Adopt hot air circulation drying and dehumidification method, the temperature is controlled between 40 ° C – -55 ° C, the time is 20 hours, divided into 3 sections, the temperature of the first section is 40 ° C, the time is 4 hours, the temperature of the second section is 48 ° C, the time 8 hours, the temperature of the third stage is 55%, the time is 8 hours, and the middle process is continuously dehumidified until the humidity of the hippocampus is dried to less than 10%, and the drying process is completed.